14. SAUDI ARABIA - CUSTOMER SERVICE ............. 21 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Obey the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
Page 5
ENGLISH • Connect the mains plug to the mains • If the water inlet hose is damaged, socket only at the end of the immediately close the water tap and installation. Make sure that there is disconnect the mains plug from the access to the mains plug after the mains socket.
ENGLISH Indicator Description XtraDry indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. 5. PROGRAMMES Programme Degree of soil Programme phases Options Type of load • Normal soil •...
Water Energy Duration Programme (kWh) (min) 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test info.test@dishwasher-production.com institutes Write down the product number (PNC) that is on the rating plate.
Page 10
The indicators: , and off. The indicator still flashes. The indicator shows the current setting. If on = rinse aid empty notification is on, if off = rinse aid empty notification is off. 2. Press to change the setting.
ENGLISH 7. OPTIONS duration of some programmes, water Desired options must be consumption and the last rinse activated every time before temperature can be affected. you start a programme. XtraDry is a permanent option for all It is not possible to activate or deactivate options while a programmes other than programme is running.
8.2 How to fill the rinse aid How to fill the salt container dispenser 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time).
Page 13
ENGLISH 9.2 Setting and starting a Make sure that the appliance is in programme selection mode. programme • If the salt indicator is on, fill the salt container. The Auto Off function • If the rinse aid indicator is on, fill the rinse aid dispenser.
Cancelling the programme programme duration. When you close the door, the appliance continues from Press and hold simultaneously the point of interruption. until the appliance is in programme If the door is opened for selection mode.
ENGLISH instructions on the detergent • Make sure that glasses do not touch packaging. other glasses. • Put small items in the cutlery basket. 10.3 What to do if you want to • Put light items in the upper basket. Make sure that the items do not stop using multi-tablets move.
Page 16
11.1 Cleaning the filters The filter system is made of 3 parts. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A).
ENGLISH 11.2 Cleaning the spray arms • If you regularly use short duration programmes, these can leave Do not remove the spray arms. If the deposits of grease and limescale holes in the spray arms are clogged, inside the appliance. To prevent this, remove remaining parts of soil with a thin we recommend to run long duration pointed object.
Page 18
Problem and alarm code Possible cause and solution The appliance does not fill with wa‐ • Make sure that the water tap is open. ter. • Make sure that the pressure of the water • The end indicator flashes 1 time supply is not too low.
Page 19
ENGLISH the problem occurs again, contact an Refer to "Before first use", Authorised Service Centre. "Daily use", or "Hints and For alarm codes not described in the tips" for other possible table, contact an Authorised Service causes. Centre. Once you have checked the appliance, deactivate and activate the appliance.
Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". • Silver and stainless steel cutlery were placed to‐ gether. Avoid to put silver and stainless steel items close together.
ENGLISH Water supply max 60 °C Cold water or hot water Capacity Place settings Power consumption Left-on mode (W) Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian ener‐ gy), use the hot water supply to decrease energy consumption.
Need help?
Do you have a question about the ESL5327LO and is the answer not in the manual?
Questions and answers