Electrolux ESL5322LO User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Dishwasher
  5. ESL5322LO
  6. User manual

Electrolux ESL5322LO User Manual

Hide thumbs Also See for ESL5322LO:

Advertisement

Table of Contents

See also: User Manual
ESL5322LO
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Electrolux ESL5322LO

Summary of Contents for Electrolux ESL5322LO

  • Page 1 ESL5322LO Dishwasher User Manual...

  • Page 2: Table Of Contents

    13. TECHNICAL INFORMATION................. 21 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Obey the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Connect the mains plug to the mains • If the water inlet hose is damaged, socket only at the end of the immediately close the water tap and installation. Make sure that there is disconnect the mains plug from the access to the mains plug after the mains socket.

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket Air vent 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated.

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button Programme buttons Display Indicators Delay button 4.1 Indicators Indicator Description XtraDry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5. PROGRAMMES Programme Degree of soil Programme phases...

  • Page 8: Settings

    Programme Degree of soil Programme phases Options Type of load • All • Prewash 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes).
  • Page 9 ENGLISH As the appliance stores the saved To enter user mode, press and hold settings, there is no need to configure simultaneously it before every cycle. until the indicators flash and the display is How to set the programme blank. selection mode 6.2 The water softener The appliance is in programme selection...
  • Page 10 2. Press to change the setting. How to set the water softener level = the rinse aid empty notification is deactivated. Make sure the appliance is in user mode. 3. Press on/off to confirm the setting. 1. Press 6.4 Acoustic signals •...

  • Page 11: Options

    ENGLISH To improve the drying performance refer to the XtraDry option or activate AirDry. CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. How to deactivate AirDry Make sure the appliance is in user mode.

  • Page 12: Before First Use

    How to activate XtraDry Every time activated, XtraDry is off and Press simultaneously needs to be chosen manually. The indicator is on. The display shows the updated programme duration. 8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply.

  • Page 13: Daily Use

    ENGLISH 8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
  • Page 14 Starting a programme with delay start 1. Set a programme. 2. Press again and again until the display shows the delay time you want to set (from 1 to 24 hours). The delay indicator comes on. 3. Close the appliance door to start the countdown.

  • Page 15: Hints And Tips

    ENGLISH All buttons are inactive except for the Press and hold simultaneously on/off button. until the appliance is in 1. Press the on/off button or wait for the programme selection mode. Auto Off function to automatically deactivate the appliance. Cancelling the programme If you open the door before the activation of Auto Off, the appliance Press and hold simultaneously...

  • Page 16: Care And Cleaning

    3. Start the shortest programme with a • Make sure that the spray arm can rinsing phase. Do not add detergent move freely before you start a and do not load the baskets. programme. 4. When the programme is completed, 10.5 Before starting a...
  • Page 17 ENGLISH 1. Turn the filter (B) counterclockwise and remove it. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3.

  • Page 18: Troubleshooting

    • If you regularly use short duration • To maintain the performance of your programmes, these can leave appliance at its best, we recommend deposits of grease and limescale to use monthly a specific cleaning inside the appliance. To prevent this, product for dishwashers.
  • Page 19 ENGLISH Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap and contact an Authorised Serv‐ ice Centre. The display shows The appliance stops and • It is normal. It provides optimal cleaning results and starts more times during energy savings.
  • Page 20 12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and filter. Refer to "Care and Cleaning".

  • Page 21: Technical Information

    ENGLISH Problem Possible cause and solution There are residues of deter‐ • The detergent tablet got stuck in the dispenser and gent in the dispenser at the therefore was not completely washed away by wa‐ end of the programme. ter. •...
  • Page 22 Power consumption Left-on mode (W) Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
  • Page 23 ENGLISH...
  • Page 24 www.electrolux.com/shop...

Table of Contents