Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Electrolux manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual.
ENGLISH Environmental information Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
– and other working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments. Do not change the specification of this appliance. • The operating water pressure (minimum and •...
Page 5
To disconnect the hose, press • Install the appliance in a safe and the lever (B) and turn the fastener (A) suitable place that meets installation clockwise. requirements. www.youtube.com/electrolux www.youtube.com/aeg How to install your 60 cm Dishwasher Sliding Hinge 2.2 Electrical connection WARNING! Risk of fire and electric shock.
2.5 Service status of the appliance. They are not intended to be used in other • To repair the appliance contact the applications and are not suitable for Authorised Service Centre. Use household room illumination. original spare parts only.
ENGLISH 3.2 Beam-on-Floor • When the appliance has a malfunction, the white light flashes. Beam-on-Floor is a light displayed on the Beam-on-Floor is off when floor below the appliance door. the appliance is deactivated. • When a programme starts, a white light is on and stays on for the duration of the programme.
Indicator Description Drying phase indicator. It is on when a programme with the drying phase is selected. It flashes when the drying phase operates. Refer to "Programme selection". 5. PROGRAMME SELECTION 5.1 MY TIME energy and water consumption for crockery and cutlery with normal soil.
Page 9
ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry • Prewash Not applicable Pre-rinse Crockery, Fresh, lightly •...
Page 11
ENGLISH Settings Values Description Latest pro‐ Enable or disable the automatic selection gramme selec‐ Off (default) of the most recently used programme and tion options. 1) For more details, refer to the information provided in this chapter. You can change the basic settings in How to enter setting mode setting mode.
6.2 The rinse aid empty AirDry is automatically activated with all programmes other than Pre-rinse. notification The duration of the drying phase and the The rinse aid helps to dry the dishes door opening time vary depending on the without streaks and stains.
ENGLISH manufacturing process. Do not use CAUTION! detergent and do not put dishes in Only use rinse aid designed the baskets. specifically for dishwashers. 7.1 How to fill the rinse aid dispenser 1. Press the release button (D) to open the lid (C).
Page 14
8.2 How to select and start a • The light related to the button is programme using MY TIME • The display shows the longest selection bar possible program duration. 2. Close the appliance door to start the 1. Slide your finger across MY TIME program.
ENGLISH 8.9 Opening the door while the The function comes into operation automatically: appliance operates • When the programme is completed. • After 5 minutes if a programme was Opening the door while a programme is not started. running stops the appliance. It may affect the energy consumption and the 8.11 End of the programme programme duration.
• Use the appliance to wash • Put cutlery and small items in the dishwasher-safe items only. cutlery drawer. • Do not wash the following materials in • Make sure that the spray arms can the dishwasher: wood, horn, pewter,...
Page 17
ENGLISH • To maintain the performance of your 2. Remove the filter (C) out of filter (B). appliance, use a cleaning product 3. Remove the flat filter (A). designed specifically for dishwashers at least once every two months. Carefully follow the instructions on the packaging of the product.
Page 18
CAUTION! 3. To install the spray arm back, press it An incorrect position of the downwards. filters can cause bad washing results and damage to the appliance. 10.5 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
ENGLISH element (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
Page 20
Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
Page 21
ENGLISH Problem and alarm code Possible cause and solution The appliance door is diffi‐ • The appliance is not levelled. Loosen or tighten the cult to close. adjustable feet (if applicable). • Parts of the tableware are protruding from the bas‐ kets.
Page 22
11.3 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
13. WARRANTY FOR SALES IN AUSTRALIA AND NEW This document sets out the terms and ZEALAND conditions of the product warranties for Electrolux Appliances. It is an APPLIANCE: ELECTROLUX important document. Please keep it DISHWASHERS with your proof of purchase...
Page 24
Appliance to and from Electrolux respect of Appliances purchased or its ASC. Travel and transportation in Australia and Electrolux (NZ) will be arranged by Electrolux as part Limited (collectively "Electrolux") of any valid warranty claim. of 3-5 Niall Burgess Road, Mount 6.
Page 25
Electrolux and its agents including number of the Appliance ASC may exchange information in available; relation to you to enable Electrolux to c. have the proof of purchase (e.g. meet its obligations under this an invoice) available; warranty.
FOR SERVICE FOR SPARE PARTS or to find the address of your nearest au‐ or to find the address of your nearest thorised service centre in New Zealand state spare parts centre in New Zealand PLEASE CALL 0800 10 66 10...
Need help?
Do you have a question about the ESL51600ZO and is the answer not in the manual?
Questions and answers