Side-By-Side 19" Rack Mounting; Overview; Mounting Procedure For Side-By-Side Rack Mounting - ABB SAM600-IO Installation Manual

1MRK 514 030-UEN Rev. C
5.3.3

Side-by-side 19" rack mounting

5.3.3.1

Overview

IED case size 1/2 x 19" and RHGS cases can be mounted side-by-side up to a maximum size of 19".
For side-by-side rack mounting, the side-by-side mounting kit together with the 19" rack panel
mounting kit must be used. The mounting kit has to be ordered separately.
5.3.3.2

Mounting procedure for side-by-side rack mounting

3
4
IEC17000121 V1 EN-US
Figure 5:
PosNo
1
2, 3
4
5
Switchgear control unit SAM600-IO
Installation manual
Use only the screws included in the mounting kit when mounting the plates and the
angles on the IED. Screws with wrong dimension may damage the PCBs inside the
IED.
1
2
IEC17000121-1-en.vsdx
Side-by-side rack mounting details.
The required torque for the screws is 3.5 Nm.
Description
Mounting plate
Screw
Mounting angle
Washer
© 2017 - 2021 Hitachi Power Grids. All rights reserved
3
Quantity
2
16
2
16
Section 5
Mounting
IP10323-1 v1
M11974-3 v3
M11955-2 v4
Type
-
M4x6
-
M4x6
17