Unpacking, Inspecting And Storing; Removing Transport Packaging; Inspecting The Product; Identifying The Product - ABB SAM600-IO Installation Manual

Hide thumbs Also See for SAM600-IO:

Protocol manual (108 pages)

Operation manual (74 pages)

Applications manual (92 pages)

Table Of Contents

Table of Contents

1MRK 514 030-UEN Rev. C

Section 4

4.1

Removing transport packaging

IEDs require careful handling.

Examine the delivered products to ensure that they have not been damaged during the

transport.

Remove the transport packing carefully without force.

4.2

Inspecting the product

4.2.1

Identifying the product

Locate the IED's order number from the label attached to the IED's case.

Compare the IED's order number with the ordering information to verify that the received

product is correct.

4.2.2

Checking delivery items

Check that all items are included in the delivery in accordance with the delivery documents.

4.2.3

Inspecting the IED

•

Check the IED to see if any damage occurred during transportation.

4.2.4

Returning an IED damaged in transit

If damage has occurred during transport, appropriate actions must be taken against the latest carrier.

Please inform the nearest Hitachi Power Grids office or representative. Notify Hitachi Power Grids

immediately if there are any discrepancies in relation to the delivery documents.

4.3

Storing

Storing of the IED before installation must be done in the original transport packaging in a dry and

dust free place. Storage temperature must be within the range of -40° C to +70° C. The average high

temperature is recommended to be less than +40° C, to minimize component ageing.

Switchgear control unit SAM600-IO

Installation manual