Side-By-Side 19" Rack Mounting; Overview; Mounting Procedure For Side-By-Side Rack Mounting; Ied Mounted With A Rhgs6 Case - ABB Relion 650 Series Installation Manual

Section 5
Mounting
5.3.4

Side-by-side 19" rack mounting

5.3.4.1

Overview

IED case size 1/2 x 19" and RHGS cases can be mounted side-by-side up to a maximum size of
19". For side-by-side rack mounting, the side-by-side mounting kit together with the 19" rack
panel mounting kit must be used. The mounting kit has to be ordered separately.
5.3.4.2

Mounting procedure for side-by-side rack mounting

3
4
IEC04000456 V3 EN-US
Figure 7:
PosNo
1
2, 3
4
5
5.3.4.3

IED mounted with a RHGS6 case

A 1/2 x 19" size IED can be mounted with a RHGS case (6 or 12). The RHGS case can be used for
mounting a test switch of type RTXP 24. It also has enough space for a terminal base of RX 2
type for mounting of, for example, a DC-switch or two auxiliary relays.
24
Use only the screws included in the mounting kit when mounting the plates and
the angles on the IED. Screws with wrong dimension may damage the PCBs
inside the IED.
1
2
IEC040004563enOriginal.vsdx
Side-by-side rack mounting details.
The required torque for the screws is 3.5 Nm.
Description
Mounting plate
Screw
Mounting angle
Washer
© Copyright 2017 ABB. All rights reserved
3
Quantity
2
16
2
16
1MRK 514 027-UEN D
IP10323-1 v1
M11974-3 v3
M11955-2 v4
Type
-
M4x6
-
M4x6
M11953-3 v4
650 series
Installation manual