Specifications - Tripp Lite SmartRack SRTH6UB Owner's Manual

Equipment Installation
3
Compress the cage nut at the sides slightly to allow the remaining
flange to fit through the square opening. When the cage nut is
properly installed, both flanges will protrude through the square
opening and will be visible on the outer surface of the mounting rail.
Repeat steps 1-3 until all required cage nuts are installed.
4
After installing the required cage nuts, use the included mounting
screws and cup washers to secure your equipment to the rack rail.
Place the cup washers between the screws and the equipment
mounting brackets.
Note: Your equipment may also include mounting hardware. Read the
mounting instructions that came with your equipment before installing your
equipment.
To Remove Cage Nuts, Reverse Steps 1-3
Note: You may wish to use a cage nut tool (user-supplied) to aid cage nut
installation and removal.

Specifications

Model Height
13.3"
SRTH6UB
(338 mm)
23.9"
SRTH12UB
(607 mm)
Unit Dimensions
Width Depth
23.6" 43"
(599 mm) (1092 mm)
23.6" 43"
(599 mm) (1092 mm)
3
4
Weight Height
84.8 lb. 22.8"
(38.5 kg) (579 mm)
118 lb. 24.4"
(53.5 kg) (620 mm)
13
2 2
2 1
2 0
2 2
1 9
2 1
1 8
2 0
1 9
1 8
Shipping Dimensions
Width Depth
39.2" 10.6"
(996 mm) (269 mm)
39.2" 15.4"
(996 mm) (391 mm)
Weight
100 lb.
(45.4 kg)
132 lb.
(60 kg)