Reversing Front Door - Tripp Lite SmartRack SRTH6UB Owner's Manual

Configuration

Reversing Front Door

WARNING: Do not attempt to reverse the front door without assistance.
1
Remove the screw connecting the ground wire to the inside of the
door.
2
Remove the 2 screws connecting the door handle to the door.
Remove the door handle.
3
Remove the screw and washer from the rear of the door handle and
remove the latching mechanism. Rotate the latch washer counter-
clockwise 90 degrees and reverse the latch so it points in the
opposite direction, then use the screw and washer to re-attach the
latch to the rear of the door handle.
4
Remove the door by following the steps in the previous section.
1
2
3
4
7