Table of Contents
Advertisement
OPERATION
Standard Menu Options
Note: Available options will depend on specific meter configuration. Not all options are available on all meters.
Options not ordered with your meter will not appear on the meter menu.
T UNIT
View or change TOTAL
volume units
R UNIT
View or change flow
RATE units
SET P
View or change pulse
output scaling
DAMP
View or change # of
samples for rolling
average.
Special SUBMENU for Further Options
The EXIT tab in the MAIN MENU has a second function.
If, instead of using the hold and tap sequence to return
to the HOME screen, you tap
be redirected to a SUBMENU screen from which you can
access several more options.
Navigation in this SUBMENU is the same as for the MAIN
MENU. Whenever you wish, go to the EXIT tab in the
SUBMENU and perform the hold and tap sequence to
return to the MAIN MENU.
INFO
COMM MBID
PRESS
ABOUT METER
S AMP
HPOLL
T UNIT
R UNIT SET P
DAMP
TOTAL = G ALLONS
PRESS
+
TO SET TOTAL
UNIT S FOR DISPLAY
SET 4 SET 20 SET F
EXIT
T UNIT
R UNIT
SET P
DAMP
FLOW RATE = G ALLONS/MIN
PRESS
+
TO SET RATE
UNIT S FOR DISPLAY
SET 4 SET 20 SET F
EXIT
T UNIT R UNIT
SET P
DAMP
00001.0 G ALLONS
PRESS
+
TO SET
G ALLONS TOTALIZED PER
PULSE SENT OUT PULSE1
SET 4 SET 20 SET F
EXIT
T UNIT
R UNIT SET P
DAMP
DAMPING = 1
PRESS
+
TO SET
DAMPING VALUE
SET 4 SET 20 SET F
EXIT
seven times, you will
FL DIR
+
TO VIEW INFO
FOUT
EXIT
Sub-Menu
SET 4
View or change flow
rate corresponding
to 4mA. (Externally
powered units only)
SET 20
View or change flow
rate corresponding
to 20mA. (Externally
powered units only)
EXIT
Return to HOME
SCREEN or enter
SUBMENU
INFO:
Meter model number, serial number, and
firmware version.
COMM: Modbus
baud rate and parity.
®
MBID:
Modbus
address
®
SAMP: Sample rate (Battery powered version only.)
EXIT:
Return to MAIN MENU or enter next submenu.
INFO
PRESS
ABOUT METER
S AMP
S AMP HPOLL
Sub-Menu - Battery Only Version
Page 16
FMG470 Series
T UNIT R UNIT SET P
000 40.0 G ALLONS/MIN
PRESS
+
TO SET FLOW
RATE AT WHICH 4mA
(MIN) OUTPUT IS DESIRED
SET 4
SET 20 SET F
T UNIT R UNIT SET P
00200.0 G ALLONS/MIN
PRESS
+
TO SET FLOW
RATE AT WHICH 20mA
(MAX) OUTPUT IS DESIRED
SET 4
SET 20
SET F
T UNIT
R UNIT SET P
PRESS
+
EXIT MENU
AND RETURN TO FLOW
DISPLAY
SET 4 SET 20 SET F
COMM MBID
FL DIR
+
TO VIEW INFO
FOUT
EXIT
omega.com
DAMP
EXIT
DAMP
EXIT
DAMP
EXIT
Advertisement
Table of Contents
