Set Sdo Server - ADF Web HD67C58-B2 User Manual

Industrial Electronic Devices

SET SDO SERVER:

By pressing the "Set SDO Server" button from the main
window for SW67C58 (Fig. 2) the window "Set SDO Server
Access" appears (Fig. 7).
This window is made to create the SDO in read or write in the
CANopen side, and to indicate which byte are associated to
these SDOs.
It is divided in two parts, the "SDO in read" and the "SDO in
Write".
The first part is used to read, using the SDO, the data arrived
from the EnOcean side. The second is used to write, using
SDO, the data that will be sent to the EnOcean side.
The data of the columns have the following meanings:
In the field "Index" the address of the SDO is defined;
In the field "SubIndex" the second address of the SDO
is defined;
If the field "N Byte" the dimension of the SDO is
defined (it can be 1, 2 or 4);
In the field "Address
internal arrays where read/write first byte of the SDO;
In the field "Address Byte2" insert the address of the internal arrays where read/write second byte of the SDO (only if N Byte is 2 or
4);
In the field "Address Byte3" insert the address of the internal arrays where read/write third byte of the SDO (only if N Byte is 4);
In the field "Address Byte4" insert the address of the internal arrays where read/write fourth byte of the SDO (only if N Byte is 4);
In the field "Mnemonic" the description for the SDO is defined.
ADFweb.com S.r.l.
Byte1" insert the address of the
User Manual EnOcean / CANopen
Document code: MN67C58_ENG
Figure 7: "Set SDO Server Access" window
Revision 1.000 Page 21 of 31