DPS Telecom NetGuardian SUI User Manual page 6

2
NetGuardian SUI supports simultaneous SNMP and DCP operation.
NetGuardian SUI has the option of up to 8 Analogs, 8 or 6 Discrete alarms and 2 control relays, all form
A, user defined NO/NC with shunt. The control relays allow network administrators to respond remotely
to threats to system integrity. Using the control relays, network administrators can turn on backup
generators, open doors and gates for emergency access, reboot equipment, or perform other functions.
The NetGuardian SUI also allows you to reverse the logic state of the alarm on a point by point basis for
discrete alarms. The single D-Wire port gives access to the "DPS Sensor Network" for measuring
environmental conditions by daisy-chaining multiple sensors together. Up to 8 notifications can be
created and sent via email/txt and can include TRIP protocol.
Another feature of the NetGuardian SUI is user-defined alarm qualification times. This will allow you to
clearly distinguish momentary status changes from serious problems.