Table of Contents
Advertisement
optional table
inserts
grizzly offers replacement zero-clearance table
inserts. if you plan on using a dado blade with
your saw, you need to purchase an additional
table insert for the dado blade.
important: zero-clearance inserts cut with a
dado blade should not be used later with a stan-
dard blade. not only will you lose the benefits of
having zero clearance, the large gaps around the
blade could increase your risk of injury. for this
reason, we strongly recommend that you have a
dedicated table insert for each dado width.
h9910—dado zero-clearance insert
h9911—standard zero-clearance insert
NOTICE
refer to the newest copy of the grizzly
catalog for other accessories available for
this machine.
blade requirements
the spreader/riving knife included with this
machine is 0.09" (2.3mm) thick and is only
designed for 12" diameter blades.
When choosing a standard blade, make sure the
blade size meets the requirements listed below.
(this does not apply to dado blades.) the thick-
ness of the blade body and teeth can be mea-
sured with calipers or any precision measuring
device.
blade size requirements:
•
body thickness: 0.074"–0.082"
(1.9mm–2.1mm)
•
Kerf
(tooth)
thickness:
(2.9mm–3.1mm)
-2-
to install a new blade:
1.
2.
3.
4.
figure 3. example of correct blade direction and
5.
0.114"–0.122"
6.
blade installation
disConneCt saW froM poWer!
remove the table insert and blade guard/riv-
ing knife, depending on what is installed.
use the arbor wrenches to loosen and remove
the arbor nut, flange, and blade. note: The
arbor nut has right hand threads; turn it coun-
terclockwise to loosen.
figure 2. loosening arbor nut.
slide the blade over the arbor with the teeth
facing the front of the saw, as shown in
figure 3.
blade components installation order.
re-install the arbor flange and the arbor nut,
then tighten them against the blade with the
wrenches included with the saw, as shown in
2
figure
. do not overtighten.
re-install the blade guard/riving knife and the
table insert.
g0605X-6X (M-1/10, s7/10+)
Advertisement
Table of Contents
