Cooling Level; Ionisation Function; Drying And Styling Hair - Silvercrest SHC 2000 A1 Operating Instructions Manual

Cooling level

With the cooling level button 6
combination of blower and heat levels (except level "0"). If you wish to create
a cold air stream, press and hold the cooling level button 6
longer need the cold air stream, release the cooling level button 6

Ionisation function

This hairdryer is fitted with an ionisation function.
If hair is dried using a normal hairdryer, the hair becomes charged statically and
starts to "fly".
The ionisation function ensures that this charging of the hair is neutralised and
cancelled. The hair becomes soft, supple, shiny and easier to style.
Please note, however, that the ionisation function will only work optimally if the
attachments (finger diffuser 7/ styling jet 1) are removed as the attachment will
interfere with the application of the ions to the hair. Therefore, use the hairdryer
without attachments for maximum ionisation effect.

Drying and styling hair

■ To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period. After drying the hair, switch to a lower blower and
heat level to shape the hairstyle.
With the supplied styling jet 1 you can apply a directed airflow to shape
■
and style your hair. Start by removing the finger diffuser 7 first with a
downwards snapping motion. Fit the styling jet 1 by pushing it with light
pressure onto the hair dryer so that it snaps into place and sits evenly on the
hair dryer.
If you no longer require the styling jet 1, wait until the appliance has cooled
down and pull it off with a downwards snapping motion:
SHC 2000 A1
you can produce a cooler air flow with any
. When you no
.
GB │ IE │ 7 ■