General ML-3DR Instruction Manual page 9

Using the Multi-purpose Mount (continued)
FIGURE 9
FIGURE 10
FIGURE 11
Mounting via the clamp
Attach the two mount pieces together via the
•
magnetic backing (Fig.9).
Attach the instrument to the mount using the
•
thumb screw.
Use the clamp to mount to a suspended ceiling
•
track, ensuring that the mount has a strong
hold before releasing your hands.
To adjust the height of the instrument, unlock
•
the height adjustment knob. Rotate the
height adjustment knob to raise or lower the
instrument to the desired height. Retighten
the height adjustment lock knob to secure in
place. Alternatively, slide the mount on the
magnetic backing.
To rotate the instrument on the mount, loosen
•
the mini thumb screw, position the instrument,
and then re-tighten the thumb screw.
Mounting via screw fixing points - Method 1
Using the single magnetic mount piece
•
(Fig.10), attach the instrument to the mount
using the thumb screw.
Fix a screw into a secure surface and hook the
•
mount over the screw. Ensuring that the mount
has a strong hold before releasing your hands.
To adjust the height of the instrument, unlock
•
the height adjustment knob. Rotate the
height adjustment knob to raise or lower the
instrument to the desired height. Retighten the
height adjustment lock knob to secure in place.
To rotate the instrument on the mount, loosen
•
the mini thumb screw, position the instrument,
and then re-tighten the thumb screw.
Mounting via screw fixing points - Method 2
Attach the two mount pieces together with the
•
screw hole at the top (Fig.11) and follow the
instructions for method 1.
This method allows the magnetic piece to slide
•
up and down for added height adjustment
flexibility.
9