Laser Safety - General ML-3DR Instruction Manual

Laser Safety

Read the following safety instructions before attempting to operate this tool.
Keep these instructions in a safe place or store in the carry pouch for future reference.
! WARNING! SAVE ALL WARNINGS & INSTRUCTIONS FOR FUTURE REFERENCE.
Read and understand all instructions.
Use the tool only with the
•
specifically designated batteries.
Store the tool out of reach of children and
•
other untrained persons. Laser tools are
dangerous in the hands of untrained users.
Use only accessories that are
•
recommended for your model.
Tool service must be performed only by
•
qualified repair personnel. Repairs, service
or maintenance performed by unqualified
personnel will void the warranty.
Only approved and authorised service
technicians can carry out warranty repairs.
Do not use optical tools such as a telescope
•
or transit to view the laser beam. Serious
eye injury could result.
Do not place the tool in a position which
•
may cause anyone to intentionally or
unintentionally stare into the laser beam.
Serious eye injury could result.
! WARNING!
DO NOT DISASSEMBLE THE LASER.
There are no user serviceable parts inside.
Disassembling the tool will void all
warranties on the product. Do not modify
the tool in any way. Modifying the tool may
result in hazardous laser radiation exposure.
2
Do not position the tool near a reflective
•
surface which may reflect the laser beam
toward anyone's eyes. Serious eye injury
could result.
Do not set up the tool at a position where
•
the laser beam can cross any person at
head height.
Do not let children come in contact with
•
the tool.
Turn the tool off when it is not in use.
•
Leaving the tool on increases the risk of
staring into the laser beam.
Do not operate the tool around children or
•
allow children to operate the tool. Serious
eye injury may result.
Position the tool securely on a level
•
surface. Damage to the laser or serious
injury could result if the laser falls.
Do not remove or deface warning labels.
•
CAUTION!
CLASS 2 LASER PRODUCT
Never look into the laser beam directly
•
and intentionally.
Do not use optical tools to view the
•
laser beam.
Do not set up the tool at a position
•
where the laser beam can cross any
person at head height.
Do not let children come in contact
•
with the laser.