Power Supply - General ML-3DR Instruction Manual

Using the Laser (continued)
FIGURE 1
FIGURE 2

POWER SUPPLY

The instrument is supplied with one
•
li-ion battery packs as its power source.
Charging the li-ion battery pack
Insert the charger into the charging adaptor.
•
Connect the li-ion battery onto the charging
adaptor. Plug the charger into a power source.
(Fig.1)
Progress will be shown by the power indicator
•
display on the charging adaptor as below:
Red (flashing) = Charger and battery
are not connected.
Red (constant) = Battery is charging
Green (constant) = Battery is charged
Charging time is approximately 3-4 hours
•
for a depleted battery.
Inserting & removing the li-ion battery pack
Open the battery cover door and insert the
•
battery tray (Fig.2)
Insert the li-ion battery pack and close the
•
battery door.
5