Advertisement
Quick Links
Chelsea Buffet Three Door
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
A
B
dowel
screw
bolt
locking
x22
x10
x14
nut x14
J
K
L
Long
adjuster
nut
x4
Allen Bolts
x2
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
F
G
screw
hinge
wedge
x36
x4
x8
M
N
O
allen
plastic
big
key x1
glide x4
dowel
x4
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
I
H
screw
long
strap x1
x8
dowel
x2
P
Q
hinge
shelf
x2
support
x12
V
W
X
safety
screw
wall
x1
anchor
screw
x1
Wall Strap
Y
Z
wall
washer
x2
x1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Chelsea Buffet Three Door
Summary of Contents for Mocka Chelsea Buffet Three Door
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Chelsea Buffet Three Door Assembly Instructions Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Insert 2x bolts (C) into panels [2] and [3]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Chelsea Buffet Three Door Assembly Instructions FLIP FLIP Insert 2x bolts (C) into panel [4]. Tighten with a screwdriver. Insert 2x bolts (C) into panel [5]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panels [6] to panels [4] and [5] and secure with 2x locking nuts (D). Attach panels [6] to panels [4] and [5] and secure with 2x locking nuts (D) and 2x long dowels (I). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panel [2] to panel [6] and secure with 1x locking nut (D) Attach panel [3] to panel [6] and secure with 1x locking nut (D) and 1x dowel (A). Tighten with a screwdriver. and 1x dowel (A). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach panel [1] to panels [2], [3], [4] and [5] and secure with 8x locking Slide panels [9] along the grooves between the side panels [2], [3], [4] nuts (D) and 8x dowels (A). Tighten with a screwdriver. and [5]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 4x dowels (A) and secure with 2x screws (B). Tighten with an Allen Attach 4x plastic glides (N) to the end of legs [11] using hammer. key(M) and screwdriver.Insert the 2x adjusters (L) into the middle support. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Tighten with a screwdriver. Insert the 12x shelf supports (Q) to panels [2], [3], [4] and [5]. Insert the Shelf Panels [7] into the unit by resting on the Shelf Supports. Ensure the shelf is positioned securely. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and using 1x washers (Z) and 1x screws (W). Tighten with a 1x wall screws (Y). Ensure unit is balanced and steady before use. screwdriver. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Chelsea Buffet Three Door and is the answer not in the manual?
Questions and answers