Table of Contents
Advertisement
Quick Links
Chelsea Four Drawer
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
screw
bolt
dowel
locking
x30
x4
x8
nut x8
L
K
M
screw
screw
nut
x8
x24
Allen Bolts
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
screw
slide
slide
slide
x40
rail x4
rail x4
rail x4
O
P
N
Long
allen
small
small
bolt
locking
key x1
x20
nut x20
x4
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
H
I
slide
wedge
rail x4
x8
Q
R
S
plastic
big
glide x4
dowel
x4
V
W
X
safety
screw
wall
x2
strap x2
anchor
x2
Wall Strap
Y
Z
wall
washer
screw
x4
x2
1
Advertisement
Table of Contents
Related Manuals for Mocka Chelsea Four Drawer
Summary of Contents for Mocka Chelsea Four Drawer
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 [4] and secure with 12x small screws (E) . Attach 4x slide rails (F) to panel to the panel [3] and secure with 2x locking nuts (D). Tighten with a [3] and secure with 12x small screws (E).Tighten with a screwdriver. screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Slide panel [8] between the grooves of panels [3] and [4] to form the panel [4] to the unit and secure with 2x locking nuts (D). Tighten back of the unit, as shown. with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Secure with 4x long Allen bolts (N). Tighten with an Allen key 4x screws (B). Tighten with a screwdriver. (Q). Attach 4x plastic glides (R) to the end of legs. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver. Slide panel [8] between the grooves of panels [3] and [4] to form the back of the unit, as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 [13] to panel [10] with 1x dowel (A) and 5x small locking nuts (P). Tighten with a screwdriver. Slide panel [14] down along the grooves between panels [11] and [12] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Now attach 1x slide rail (I) to panel [12] and 1x slide rail (H) along the rails. to panel [11] as shown. Secure with 4x small screws (E) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 2x washer (Z), 2x wall plug (X) and 2x screw (Y). Ensure unit is 2x screw (W). Tighten with a screwdriver. balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Chelsea Four Drawer and is the answer not in the manual?
Questions and answers