Advertisement
Quick Links
Chelsea Six Drawer-Wide
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
screw
bolt
dowel
locking
x34
x9
x8
nut x8
L
M
N
screw
Long
nut
x36
Allen Bolts
x4
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
screw
slide
slide
slide
x60
rail x6
rail x6
rail x6
O
P
Q
R
allen
plastic
small
small
bolt
locking
key x1
glide x4
x30
nut x30
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
K
H
I
slide
wedge
screw
rail x6
x8
x8
T
S
U
big
adjuster
dowel
long
x1
dowel
x4
x6
and hammer required
V
W
X
safety
screw
wall
x2
strap x2
anchor
x2
Wall Strap
Y
Z
wall
washer
screw
x4
x2
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Chelsea Six Drawer-Wide
Summary of Contents for Mocka Chelsea Six Drawer-Wide
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 9x small screws (E). Flip panel [5] over,attach 3x slide and secure with 9x small screws (E). Tighten with a screwdriver. rail (G) and secure with 9x small screws (E). And tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 [5], and attach panel [7] to panel [3] and [5] with 1x locking nuts (D) 1x locking nut (D). Tighten with a screwdriver. and 2x screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 [9]. Attach panel [10] to panel [2] using 2x dowels (A) and secure with 1x screw (B). Tighten with an Allen key(Q) and screwdriver. Insert the adjuster (U) into the middle support. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panel [2] to the panels [3], [4] and [5] with 6x dowels (A) and secure with 6x screws (B). Tighten with a screwdriver. back of the unit, as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver. Attach panel [1] to the unit with 6x dowels (A) and secure with 6x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Slide panel [16] down along the grooves between panels [13] panel [13] as shown. Secure with 4x small screws (E) and tighten and [14] to form the base of the drawer. with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 (V) to the top of the back side of the unit as shown using 2x washer (Z) and 2x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 (V). Fasten to wall using 2x washer (Z), 2x wall plug (X) and 2x screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Chelsea Six Drawer-Wide and is the answer not in the manual?
Questions and answers