Video Playback - Silvercrest SKAW 5.00 A1 User Manual And Service Information

English
6.4

Video playback

For video playback proceed as follows:
1. To switch on the camcorder open the LCD monitor (C).
2. To select Video Mode, press the MODE button (S) until a movie camera
( ) appears at the top left of the screen.
3. To select Playback Mode, press the playback button (Q).
4. Select the video you wish to view:
Sequential search: Press the navigation buttons left/right (L).
Selective search: Press the zoom button "W" (D). Thumbnails of the rec-
orded videos are displayed on the LCD screen (J). Use the navigation
buttons (L) to navigate between the thumbnails. Use the zoom button
"T" (D) to switch to sequential search.
5. Start playback by pressing the centre navigation button (L). During play-
back you can ...
− Fast forward by pressing the right navigation button (L). Switch to
normal playback by pressing the centre navigation button (L). If you
press the right navigation button (L) again during fast forward, the
camcorder switches to the next video recording.
− Fast rewind by pressing the left navigation button (L). Switch to nor-
mal playback by pressing the centre navigation button (L).
− Adjust the volume of the internal loudspeaker by pressing the up/down
navigation buttons (L).
− Interrupt playback (pause) by pressing the zoom button "W" (D).
Press the zoom button "W" again to resume playback.
6. Stop playback by pressing the centre navigation button (L).
32
Silvercrest SCAW 5.00 A1