Table of Contents
Advertisement
Quick Links
anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•
Ratchet with 9/16" socket
•
18 volt (or higher) drill with T-25 Torx bit
•
Hammer
TABLE COMPONENTS:
(1) Tabletop with Frame
(1) Full Seat Base
ASSEMBLY HARDWARE: All hardware is stainless steel.
(33) #9 x 3"
Torx Screws
ASSEMBLY:
The assembly is a two-person operation.
1.
Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2.
Assemble the table over the shipping packaging or padded work area to avoid scratching the product.
ASSEMBLY INSTRUCTIONS
RCPHEXADA
(3) Cross Braces
(2) Half Seat Bases
(4) Seat Legs
(20) #9 x 2 1/2"
Torx Screws
Recycled Plastic ADA Picnic Table
–
(3) Table Legs
(2) Short Seats
(9) 3/8-16 x 5"
Carriage Bolts
(4) Gussets
(2) Long Seats
(9) 3/8-16
(9) 3/8"
Flat Washers
Hex Nuts
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Anova RCPHEXADA
Summary of Contents for Anova RCPHEXADA
- Page 1 ASSEMBLY INSTRUCTIONS RCPHEXADA Recycled Plastic ADA Picnic Table – anovafurnishings.com 888.535.5005 tel TOOLS NEEDED: • Ratchet with 9/16” socket • 18 volt (or higher) drill with T-25 Torx bit • Hammer TABLE COMPONENTS: (3) Cross Braces (1) Tabletop with Frame...
- Page 2 Locate the three cross braces and arrange them as shown with the outside chamfered edge oriented downward. Slide the three pieces together so they interlock and screw them together using two #9 x 2 1/2” Torx screws and one #9 x 3” Torx screw into the predrilled pilot holes in each unit.
- Page 3 Raise the cross brace assembly until the mounting holes in the cross brace are aligned with the holes in the legs. Attach the cross braces to the table legs using two 3/8” x 5” carriage bolts inserted through each leg and cross brace along with a 3/8” flat washer and 3/8”...
- Page 4 Drive the bottom screws through the gusset and into the seat base first. When inserting the side screws into the gusset and seat leg, be sure to hold the leg vertical. Note: Table is Federally ADA-compliant. 8/19/2014 Copyright 2014 ANOVA ® Made in U.S.A...
Need help?
Do you have a question about the RCPHEXADA and is the answer not in the manual?
Questions and answers