Advertisement
3. Turn the dust container cover carefully until it is released and the
HEPA filter will come away easily
4. Replace with a new one and fit it into the dust container. Then fit the dust container back into position until
it snaps into place.
Cleaning the exhaust air filter
The exhaust air filter cleans the air a final time before it leaves
the vacuum cleaner. You can clean the exhaust air filter as follows:
1. Switch off the vacuum cleaner and disconnect the plug from
the mains. To do this always pull on the plug and not on the cable.
2. Open the exhaust air grill (this is at the rear of the cyclone vacuum cleaner.)
3. The exhaust air filter is visible when the grill has been opened.
4. Rinse the filter under cold running water and allow dry.
5. Put the exhaust air filter back into place (or replace with a new one) and place in the grill.
6. Close the exhaust air filter grill.
For more information, please contact your retailer or Titan Vacuums at:
Titanvacs.com or 1-844-202-9924
- 9 -
Advertisement
