Advertisement
bag or cleaning motor filter. Never operate the vacuum cleaner without
the dust bag or filter.
1. Turn off and unplug cleaner.
2. Open bag cover by pushing latch up with fingers and
lifting bag cover.
3. Remove motor filter and clean by rinsing under warm
water, if heavily soiled. Let completely air dry before
reinstalling.
4. Open bag folds slightly.
5. Place dust bag in dust bag frame by
pushing cardboard collar into ledge
on dust bag frame until collar snaps
into position.
6. Place dust bag frame inside dust bag
compartment placing dust bag frame
into the guides at the very front of
the dust bag compartment.
7. Swing bag cover lid closed and push
to latch.
Regulating the suction power
You can set the suction power on the device individually as you
require it using the suction regulator. We recommend using
minimum suction power for delicate materials.
Select medium suction power for mattresses, upholstered
furniture and carpets. Select maximum suction power for tiled,
wood and other robust floors.
Changing the HEPA filter
The HEPA filter and the HEPA cover should be cleaned regularly. Cleaning is best done when emptying the
dust container. To do this follow the instructions in the Emptying dust container section.
1. Switch off the vacuum cleaner and disconnect the plug from the mains. To do this always pull on the plug
and not on the cord.
2. You can pull the dust container together with the cleaning system
out of their anchoring with the aid of the carrier handle on the dust
container. Take hold of the carrier handle on the dust container and
pull it upwards. Now pull the dust container out and loosen the HEPA
cover and HEPA filter out of the dust container with the aid of the
lateral unlocking button.
- 8 -
Advertisement
