Diagnostic Link Cable (Dlc); Body Parts Installation - Can-Am Spyder ST Series Manual

rbl2013-002-004
4. Verify if the front storage compartment cover
opens and closes correctly.
5. Adjust cable if necessary.
NOTICE If the key does not turn easily, do not
force it. Pull it out and reinsert.

Diagnostic Link Cable (DLC)

1. Insert diagnostic link cable (DLC) in its holder in
the front section of vehicle for storage.
rbl2013-002-005
DLC CABLE STORAGE

Body Parts Installation

NOTICE Do not overtighten screws. Any de-
formation in the body panel around the screw
is an indication that it is too tight. Be careful
not to damage the panels.
Front Panels
1. Install M6 panel nuts on front panels (included
in the PDI kit)
PREDELIVERY
Brazil models
rbl2009-001-004_a
RH FRONT PANEL SHOWN, LH SIMILAR
1. Front M6 panel nuts
All Except Brazil Models
rbl2014-002-006_a
LH FRONT PANEL SHOWN, RH SIMILAR
1. Front panel
2. Front M6 panel nuts
All Models
2. Install both front panels on vehicle using plastic
rivets removed earlier.
rbl2008-003-100_d
TYPICAL - FRONT PANEL PLASTIC RIVET LOCATION
3. Secure front panels to vehicle using screws re-
moved during front panel removal earlier.
2014-3
PARTS TO BE INSTALLED
19 / 41