Using with Google Home and Google Assistant
The robot vacuum is compatible with Google Home. Follow the steps
below to connect:
1.
Make sure your Google Home is set up and that the Google Home app
is downloaded and connected to your Google Home.
2.
Make sure you have downloaded the KALORIK Home app and
successfully connected the robot vacuum as outlined in the "KALORIK
Home app" section. Make sure it is connected to the same WiFi as the
Google Home app.
3.
In the Google Home app, tap the menu icon in the upper left corner.
4.
Select "Home control".
5.
Tap the "+" button in the lower right corner and search for "KALORIK
Home"
6.
Select you KALORIK Home's account region and input your KALORIK
Home account and password.
7.
Tap "Link Now", then "Authorize". After you assign rooms for devices,
your devices will be listed in the Home Control page. Note: all the
account information must match your KALORIK Home account
information to successfully link.
8.
The robot vacuum should appear under devices. If you wish to set a
nickname using Google Home, select the robot vacuum and tap "Set
a nickname" to enter the desired name.
After completing the steps above, you will be able to control your robot
vacuum through Google Home.
Note: if you change the device's name on the KALORIK Home app, your
Google Home must re-discover the robot vacuum.
USING THE APPLIANCE
The Kalorik Home Pure Air Smart Robot Vacuum has several cleaning functions
outlined in this section. All the functions in this section can also be utilized
through the Kalorik Home app.
IMPORTANT: Make sure the power switch on the bottom of the vacuum is
switched on before using, as outlined in the ASSEMBLY section.
www.KALORIK.com
10
RVC 46111 - 201010