•
Clean the dust container and filters with the cleaning brush or by hand.
•
Put the filters and pre-filter back together in the dust container.
Cleaning the Floor Brush
For optimal performance, cleaning the floor brush is recommended
approximately after a week of regular use. Follow the instructions below to
clean the floor brush.
•
Push the two release tabs indicated below to unlock the brush guard. Lift
the floor brush to remove.
•
Clean the floor brush with the provided cleaning tool or by hand.
•
Reinstall the floor brush by inserting the fixed protruding end first so that the
brush clicks into place.
•
Reattach the brush guard. Press down to snap the brush guard into place.
Cleaning the Side Brushes
For optimal performance, cleaning the side brushes is recommended
approximately after a month of regular use. Follow the instructions below to
clean the side brushes.
•
Remove the side brushes from the vacuum.
www.KALORIK.com
13
RVC 46111 - 201010