Table of Contents
Advertisement
Available languages
Available languages
you to control, automate and map the vacuum cleaning process. The ionic air
purifier function reduces allergens and dust in indoor environments to improve
air quality and easy breathing.
BEFORE THE FIRST USE
•
Remove any power cords and small objects from the floor that may
obstruct the vacuum. Fold any tasseled edges of area rugs underneath to
prevent tangling when vacuuming.
•
Avoid cleaning very dark-colored, high-pile rugs or rugs thicker than 1.02 in.
/ 26 mm, as they may cause the appliance to malfunction.
•
Keep the vacuum away from spaces lower than 2.87 in. / 73 mm to prevent
it from getting stuck. If necessary, place a physical barrier to block off the
problem areas.
•
Keep the vacuum away from wet areas.
•
The vacuum may climb on top of objects less than 0.63 in. / 16 mm tall.
Remove these objects if possible.
•
Anti-drop sensors prevent the vacuum from tumbling down stairs and steep
drops. They may work less effectively if dirty or used on reflective/very dark-
colored floors. It is recommended to place physical barriers to block off
areas where the vacuum may fall.
•
Remove the foam blocks beside the bumper before use.
Note: Place physical barriers in front of fireplaces and areas that could
damage the vacuum.
ASSEMBLY
•
Insert the side brushes into the vacuum.
•
Turn on the main power switch on the bottom of the vacuum.
www.KALORIK.com
5
RVC 46111 - 201010
Advertisement
Table of Contents
