電源 On - illy X7.1 Instruction Manual

■ 電源 ON
１ マシンの電源を入れる前に、タンクの水量を確認し、MAXマークの上限まで水
を補充してください。❶
２ ライトが点灯するまで電源スイッチ
い。❷
３ ボイラー温度が上がると、温度表示のアイコンが点灯し、ボイラー温度を表示し
ます。❸
４ マシンが抽出温度に達すると、コーヒー抽出ボタンが点灯し、ブザーが鳴ります。❹
：
もし三角形のライトが点灯し、ブザーが鳴ったら、 「故障かな？」の章を参考にして
ください。
：
初めて使用される時、又は長時間使用されなかった時は、使用を開始する前にカプセ
ルなしで数回抽出してください。❺
を押してマシンの電源を入れてくださ
6
Before switching on the machine check the water level in the
Empty and rinse out the drip tray every time you fi ll the water
tank; if necessary add water as described previously.
tank.
To switch the machine on, press the
Empty and rinse out the drip tray every time you fi ll the water
up.
tank.
❶
To switch the machine on, press the
up.
❸
The icons in the circle will light up progress
To switch the machine on, press the
increase in the boiler temperature.
up.
After a few minutes, when the machine re
temperature, the brew button symbol will
beep will be emitted.
If the triangular symbol
is emitted, please consult the chapter: "P
LUTIONS".
The icons in the circle will light up progressively to indicate the
increase in the boiler temperature.
The icons in the circle will light up progressively to indicate the
increase in the boiler temperature.
After a few minutes, when the machine reaches the operating
temperature, the brew button symbol will light up and a brief
beep will be emitted.
After a few minutes, when the machine reaches the operating
temperature, the brew button symbol will light up and a brief
beep will be emitted.
If the triangular symbol lights up and an intermittent beep
is emitted, please consult the chapter: "PROBLEMS AND SO-
LUTIONS". If the triangular symbol lights up and an intermittent beep
is emitted, please consult the chapter: "PROBLEMS AND SO-
LUTIONS".
Note: When using the machine for
the fi rst time or after a long period
of disuse, we suggest dispensing a
❷
Stan
Stan
button until it lights
❹
button until it lights
lights up and a
MAK
The X7
MAK
❺
"Metod
Note: When us
The X7
the fi rst time o "Metod
of disuse, we s
few cups of wa
To mak
- Turn
To mak