Thales Datacryptor Ethernet User Manual page 94

Appendix B: Loading Datacryptor Unit Software
Completing the Upload
1. Progress of the load is shown via the Upload Progress bar and you will be notified when
this is finished. If 'Save Log Events' was selected, a dialog will now prompt you for the
file name and location for saving the log file.
2. Upload of the application is complete, click Close to shut down the application, or
connect another Datacryptor for loading.
3. After the application has been loaded and the unit reboots, the algorithm will need to be
loaded into the unit. See the section
Note: Some algorithms may have to be loaded at the factory or under secure conditions.
Page 94
All manuals and user guides at all-guides.com
Commissioning
Datacryptor Ethernet User Manual
for more information.
THALES