This Manual Is Organized Into The Following Sections - Thales Datacryptor Ethernet User Manual

About This Document

This manual is organized into the following sections:

Overview provides general information on the hardware and software.
Background Information
technology and terminology.
Installation describes how to install the Datacryptor Ethernet hardware and Element Manager
Software.
Connecting to Datacryptor Ethernet Units
connect the PC to the Datacryptor Ethernet unit.
Element Manager Reference
Manager, followed by a detailed description of each in turn.
Appendix A: Device Maintenance
Datacryptor Ethernet unit.
Appendix B: Loading Datacryptor Unit Software
Thales Datacryptor Ethernet unit. Your Datacryptor will be supplied pre-loaded with software, so
you will only require the information in this appendix if a re-load or upgrade is needed.
Appendix C: Product Specifications
Appendix D: Environment and Regulatory Information
and regulatory certifications.
Appendix E: SFP and XFP Interfaces
Appendix F: Preventing Electrostatic Discharge
Appendix G: Troubleshooting
Appendix H: SNMP MIB Support
location of them.
Appendix I: Log and SNMP Trap Numbers
together with descriptions of their purpose.
Appendix J: Glossary
Page 12
All manuals and user guides at all-guides.com
provides a brief introduction to the device and Ethernet Layer 2
provides an overview of the functions provided by the Element
describes the periodic maintenance required on your Thales
gives the system specifications.
describes the possible transceiver options.
describes how to diagnose and repair common problems.
describes the SNMP MIBs supported by the device and the
defines terms used in this document.
Datacryptor Ethernet User Manual
describes the main methods that can be used to
describes how to load software into your
describes the operating conditions
describes how to minimize the risk of ESD.
provides a list of all the log and trap numbers
THALES