Show network name and password on device
When selected, the network name and password will be visible on your mobile
hotspot's LCD display screen . To hide the network name and password
on your mobile hotspot's LCD display screen, uncheck this checkbox . This
checkbox is marked by default .
Enable Wi-Fi Protected Setup (WPS)
When selected, it allows WPS-enabled devices to be connected to your
mobile hotspot without typing a Wi-Fi password . This feature is turned on by
default . If unselected, currently connected devices may be disconnected .
Security mode
Select the desired Wi-Fi security option .
• WPA3-Personal is the latest and most secure mode .
• WPA2-PSK/WPA3-Personal allows client devices that support either
WPA2-PSK or WPA3-Personal to connect .
• WPA2-PSK can be used for WPA2 devices and is set as the default security
mode .
• WPA-PSK/WPA2-PSK allows older client devices that do not support
WPA2-PSK to connect . This mode also supports WPA2-PSK .
• Open allows client devices to connect to your Wi-Fi network without entering
a password . For your security, this option should be avoided .
31