AT&T Velocity 3 User Manual page 30

• Channel: Display the wireless channel that the radio is operating on . In most
situations, leaving this as Automatic will work best, but you can manually
change the channel selection using this option .
• Width: When 802 .11n is selected in mode, width option is displayed . You can
select 20MHz or 40MHz for this option . When 802 .11ac is selected in mode,
you can select 20MHz, 40MHz, or 80MHz for this option .
Network name (SSID)
The wireless name that is displayed to client devices when they scan for
networks to join . You can enter your new network name in this field to change
it . When finished, click the SAVE & APPLY button .
Broadcast SSID
When selected, your mobile hotspot name will be visible in the list of available
Wi-Fi networks when client devices scan for networks to join . If unselected, your
mobile hotspot name will be hidden and must be added manually on the
client devices to join . This checkbox is marked by default .
Password
The Wi-Fi network password that must be entered on any client devices
needing to connect to your mobile hotspot . You can enter your new password
in this field to change it . When finished, click the SAVE & APPLY button .
Note: If you have changed the login and have forgotten the new one, you
must restore the device to the factory default settings . Using a narrow object,
such as a paperclip or ballpoint pen, press and hold the Factory reset button
located at the bottom of your mobile hotspot for five (5) seconds . You may
then log in using the default login password shown on your mobile hotspot's
Wi-Fi Info details screen .
30