Changing Wi-Fi Network Name And Password - AT&T Velocity 3 User Manual

Changing Wi-Fi network name and password

You can customize your mobile hotspot's Wi-Fi network name (SSID) and
password using the AT&T Wi-Fi Manager .
1 . On any device that is connected to the mobile hotspot, enter
http://attwifimanager or http://192 .168 .1 .1 directly into your browser
address field .
2 . Enter the login password found on the device label located underneath the
battery of your mobile hotspot .
3 . Click LOG IN button .
4 . Go to Wi-Fi > 2 .4 GHz Wi-Fi > EDIT to change your network name and
password .
5 . Click SAVE & APPLY .
Note: You will need to reconnect any connected Wi-Fi enabled devices to the
hotspot after updating any credentials .
Your mobile hotspot does not simultaneously broadcast 2 .4 GHz and 5 GHz
Wi-Fi networks . The default Wi-Fi network is 2 .4 GHz .
To change 5GHz Wi-Fi network name and password, follow the below steps:
1 . Go to Wi-Fi > 5 GHz Wi-Fi > Enable to enable the 5GHz Wi-Fi network .
2 . Click EDIT to change your network name and password .
3 . Click SAVE & APPLY .
Note: Wi-Fi devices connected to 2 .4 GHz Wi-Fi network will be disconnected
when you switch from the 2 .4 GHz Wi-Fi to the 5 GHz Wi-Fi network .
22