AT&T Velocity 3 User Manual page 19

device label .
Note: You can customize the login that is used to access the AT&T Wi-Fi
Manager by going to System > Administration . If you have changed the login
and have forgotten the new one, you must restore the device to the factory
default settings . Using a narrow object, such as a paperclip or ballpoint pen,
press and hold the Factory reset button located at the bottom of your mobile
hotspot for five (5) seconds . You may then log in using the default login
password printed on the device label located underneath the battery of your
mobile hotspot .
The AT&T Wi-Fi Manager includes a navigation panel on the left side of the
screen, which contains the following sections:
• Device information – Display general device information (see
information" on page
• Connected devices – View devices currently connected to your mobile
hotspot and block/unblock Wi-Fi devices from connecting (see
devices" on page
• Wi-Fi – Customize your device's Wi-Fi and security settings (see
page 28) .
• Messages – View messages from AT&T about your service plan (see
"Messages" on page
• Networking – Access a wide range of network and security settings (see
"Networking" on page
• Parental control – Control days and times a device can connect to the
Internet and limit the permitted websites (see
• System – Manage system administration functions such as set Date/Time,
change Password, Factory reset, Reboot, etc . (see
• Software update – Display the current software version installed and check
for updates (see
26) .
27) .
33) .
34) .
"Software update" on page
"Parental control" on page
"System" on page
50) .
"Device
"Connected
"Wi-Fi" on
42) .
44) .
19