Paramount Fitness MDX-R3 Owner's Manual And Installation Manual page 11

Hide thumbs Also See for MDX-R3:

If vacuum relief suction outlets are located below freeze line skip steps 1 and 2.

1. Remove grate from wall drain and install a 13-¾ blow through plug and blow line to achieve

airlock.

2. If 3rd suction line is installed remove grate, install a 13-¾ blow-through plug and blow line to

achieve airlock.

3. If vent tube is installed, install blow through plug and blow line to achieve airlock. Repeat

vacuum out canister. For winterizing canister visit www.1Paramount.com and click on

winterization instructions.

If vacuum relief suction outlets are located below freeze line skip steps 1 and 2.

1. Remove grate from wall drain and install a 13-¾ blow through plug and blow line to achieve

airlock.

2. If 3rd suction line is installed remove grate, install a 13-¾ blow-through plug and blow line to

achieve airlock.

3. If vent line is installed in main suction line, plug vent line and install blow through plug in pump

inlet and blow line to achieve airlock.

4. Lastly, blow vent line to achieve airlock.

MDX-R3 WINTERIZATION

WITH CANISTER

WITHOUT CANISTER

For technical assistance call 1.800.621.5886 or contact your regional representative