Installing Battery - Polycom KIRK 5020 Quick Manual

All manuals and user guides at all-guides.com
KIRK 5020 5040 UK_FR_DE_ES_IT.book Page 2 Thursday, February 25, 2010
Basic Handset Option
Removing the Battery Protection
Strip
1 To remove the battery, press down the
back cover and slide it towards the
bottom of the handset.
2 Lift off back cover.
3 Remove the battery, and then remove
the green slip from the bottom of the
battery.

Installing Battery

1 To install battery press down back
cover and slide it towards the bottom
of the handset.
2 Lift off back cover.
3 Insert battery with the label readable.
Align the contacts of the battery with
the corresponding connectors on the
battery compartment and insert the
battery towards the connectors.
Warning: Make sure that the contacts
of the battery and the connectors of
the battery compartment are aligned
before sliding the battery in the
battery compartment.
4 Press back cover back in locked
position (when you hear a click the
back cover is in position).
Note: The product label, including the CE
logo, can be found in the battery
compartment.
2