Microlife BP RM 100 Instruction Manual page 16

The risk manager instruction manual
Hide thumbs Also See for BP RM 100:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
Other possible malfunctions and possible solutions: If problems occur when using the device, the
following points should be checked and if necessary, the corresponding measures are to be taken:
Malfunction
The display remains empty when the
instrument is switched on although the
batteries are in place.
The pressure does not rise although the
pump is running.
The device frequently fails to measure
the blood pressure values, or the values
measured are too low (too high).
Every measurement results in different
values although the device functions nor-
mally and the values displayed are normal.
The blood pressure values measured
differ from those measured by the doctor.
Further information
The level of blood-pressure is subject to fluctuations even in healthy people. It is important to compare
measurements taken under the same conditions and at the same time of day. (Quiet conditions)!
If you have any questions regarding the use of this blood pressure monitor, please ask your dealer or
pharmacist for the Microlife Service representative in your country. The Microlife Service Team will be
happy to help you. Never attempt to repair the instrument yourself!
Any unauthorized opening of the instrument invalidates all guarantee claims!
Remedy
1. Check whether the batteries are installed with the correct
polarity and correct if necessary.
2. If the display is unusual, re-insert batteries or exchange them.
• Check the connection of the cuff tube and connect properly if
necessary.
1. Fit the cuff correctly on the arm.
2. Before starting the measurement make sure that the cuff is
not fitted too tightly and that there is no rolled-up sleeve
exerting pressure on the arm above the measuring position.
Take off articles of clothing if necessary.
3. Measure the blood pressure again in complete peace and quiet.
• Please read the following information and the points listed
under «Common sources of error». Repeat the measurement.
• Record the daily development of the values and consult your
doctor about them.
13

Advertisement

Table of Contents
loading

Table of Contents