Advertisement
Press Yes
"always awake"
Press Menu (
from your control panel
Frequently Asked Questions:
1. What would be the maximum distance between the device and magnetic
contact?
Ans: The magnetic contact distance is
Maximum Break
Minimum Make
2. How to convert third party wired sensors to wireless sensor?
Ans: Inside the device we have an option for converting the third party wired
sensors to wireless sensor by using MAG1 & COM or MAG2 & COM.
3. How to identify the status of sensor using LED?
Ans: Below are the details of the LED status.
Colour Status
Flashing Green
Technical Support
7times to reach zone mode(wiring) & make zone wiring as
) two times on the control panel and then press Yes to logoff
Non-Ferrous
Mounting Material
Red
:
91520 10269
OR
30mm
15mm
Description
With all contacts secure, will flash every 3
seconds.
Indicates either he reed switch or external
contact are active.
Ferrous Mounting
Material
15mm
5mm
:
indiatechsupport@texe.com
Advertisement
