Advertisement
Quick Links
Press 1234 on the control panel. The below message will be displayed.
Press Yes
Press any free zone number (eg: 105) to learn your Impaq contact-W
Press reset button
When it starts learning you need to insert the battery into the Impaq contact-W
Press Yes
Technical Support
Premier Elite Impaq Contact-W (GBB0003)
till you reach zone type
:
91520 10269
Note: In this case
we're learning
sensor in zone 105.
Note: Before learning the
sensor we need to place
the jumper in relearn
:
indiatechsupport@texe.com
Advertisement
Related Manuals for Texecom Premier Elite Impaq Contact-W
Summary of Contents for Texecom Premier Elite Impaq Contact-W
- Page 1 Premier Elite Impaq Contact-W (GBB0003) Press 1234 on the control panel. The below message will be displayed. Note: In this case we’re learning sensor in zone 105. Press Yes Note: Before learning the sensor we need to place the jumper in relearn...
- Page 2 Press Yes 7times to reach zone mode(wiring) & make zone wiring as “always awake” Press Menu ( ) two times on the control panel and then press Yes to logoff from your control panel Frequently Asked Questions: 1. What would be the maximum distance between the device and magnetic contact? Ans: The magnetic contact distance is Non-Ferrous...