Installing / Removing The Belt Clip; Installing The Additional Speaker/Microphone (Optional) - AnyTone AT-D278 Operating Manual

Installing / Removing the Belt Clip

3.3
a.
Installing the Belt Clip: Place the belt clip above the corresponding holes
on the back of the radio, and screw it into place clockwise with the two
supplied screws.
b.
Removing the Belt Clip: Unscrew counter-clockwise to remove the belt
clip.

Installing the Additional Speaker/Microphone (Optional)

3.4
Pry open the rubber MIC-Headset jack cover and then insert the Speaker /
Microphone plug into the double jack.
AT-D278 Digital DMR and Analog
3. PREPARATION
Two Way Radio
7