Table of Contents
Advertisement
Programmable room thermostat settings
5
Programmable room thermostat settings
There are two levels of settings:
1. User
2. Installer
5.1
User
Press the menu button for more than three seconds to enter the
User setting area of the Timer/programmer.
Five icons are shown across the top of the display:
1. Heating (CH)
2. Hot Water (HW)
3. Holiday
4. Info
5. Settings
3
1
2
pmam
Fig. 14
User menu
Turn the knob to select an icon, the icon is encircled to confirm
the selection, and press the knob to enter that section.
The display will dim after 20 seconds of
inactivity and remain dimmed until a button
is pressed or the knob is turned/pressed.
After 60 seconds of inactivity the display
will return to normal operation.
5.1.1 Heating
The top line of the display shows the words Time programs plus
flashing arrow heads at each end, this indicates that there are
more programs available:
1. Time programs
Time programs
Select Time programs with the knob, and press to enter.
10
4
5
Press the Return button
previous higher level.
In the Time program you can set up to 6 time and temperature
periods for CH.
Using the knob you can select various combinations of days, for
example:
▶ Mon to Fri
▶ Sat and Sun
▶ Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
and Sunday
Whether you choose to set the same times for Monday to Friday
and different times for Saturday and Sunday or set times for
individual days the setting operation is the same.
▶ Select the desired day(s) using the knob
▶ Press the knob to select Time setting 1, this should be the
first on time in the morning
▶ The hours flash, turn the knob to select the hours setting
▶ Press the knob to confirm
▶ The minutes flash, turn the knob to select the minutes
▶ Press the knob to confirm
▶ Temp. setting 1 flashes, this will be the temperature that is
comfortable for your home during the first time period
▶ Turn the knob to set the required temperature and press
the knob to confirm
▶ Time setting 2 hours flash, this will be the time that you
want the temperature set lower, maybe while the house is
unoccupied
▶ Turn the knob to select the hours setting and press the
knob to confirm
▶ The minutes flash, turn the knob to select the minutes and
press the knob to confirm
▶ Press the knob to confirm
▶ Temp. setting 2 flashes, this will be the temperature that is
set for the second time period, this should be the lowest
temperature you want the house to be at while unoccupied
▶ Turn the knob to set the required temperature and press
the knob to confirm
▶ Time setting 3 hours flash, this will be the time that the
temperature is set to another value, maybe higher because
the house is occupied now for the afternoon/evening and
you would like your heating on
▶ Repeat the process to set the hours and minutes for Time
setting 3
▶ Temp. setting 3 flashes, this will be the temperature that is
set for the third time period, this should be the temperature
that you want the house to be at during the afternoon/
evening when the house is occupied
▶ Repeat the process to set to set the required temperature
for Temp. setting 3
▶ Time setting 4 hours flash, this will be the time that the
temperature is set to another value, maybe lower for the
night time period
at any time to return to the
Comfort II– 6720810965 (2017/02)
Advertisement
Table of Contents
