Table of Contents
Advertisement
▶ Repeat the process to set the hours and minutes for Time
setting 4
▶ Temp. setting 4 flashes, this will be the temperature that is
set for the fourth time period, this should be the
temperature that you want the house to cool down to
during the night
▶ Repeat the process to set to set the required temperature
for Temp. setting 4
▶ If you require time and temperature settings, repeat the
whole process for the Time settings 5, 6 and Temp.
setting 5
If the Time settings 5 and 6 are not required,
at the end of Temp. setting 4 repeatedly press
the knob to cycle through the third period
without making any settings.
If after setting the time periods 5 and 6 you decide that you no
longer require it and wish to disable it, follow these steps:
▶ In the Time program, cycle through time periods by just
pressing the knob to accept the time and temperature
setting until you reach time setting 5
▶ Turn the knob to set the flashing hours to 00
▶ Press to accept and the minutes flash
▶ Turn the knob clockwise to 00 and then the display
changes to just dashes and time period 5 is disabled
▶ Repeat this process for temperature setting 5 and time
setting 6
5.1.2 HW
(Hot water)
The top line of the display shows the words Time programs plus
flashing arrow heads at each end, this indicates that there are
more programs:
1. Time programs
This Time program is used to set your required ON and OFF
times for the hot water. The Programmer has default time
settings as shown below:
06:30
08:30
DHW
ON
OFF
Time programs
Select DHW programs with the knob, and press to enter.
In the DHW program you can select ON and OFF times for the
hot water heating, there are three ON and three OFF programs.
Using the knob you can select various combinations of days or
individual days:
▶ Mon to Fri
▶ Sat and Sun
▶ Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
and Sunday
Whether you choose to set the same times for Monday to Friday
and different times for Saturday and Sunday or set times for
individual days the setting operation is the same.
▶ Select the desired day(s) using the knob
Comfort II– 6720810965 (2017/02)
16:30
22:30
ON
OFF
Programmable room thermostat settings
▶ Press the knob to select the first DHW ON setting
▶ The hours flash
▶ Turn the knob to select the desired hours setting
▶ Press the knob to confirm
▶ The minutes flash
▶ Turn the knob to select the desired minutes
▶ Press the knob to confirm
▶ The first DHW OFF hours flash
▶ Turn the knob to select the desired hours setting
▶ Press the knob to confirm
▶ The minutes flash
▶ Turn the knob to select the desired minutes
▶ Press the knob to confirm
▶ Now the second DHW ON hours flash
▶ Repeat the process to set the hours and minutes for the
seconding DHW ON times
▶ Repeat the process for the second DHW OFF times
If the third DHW period is not required
repeatedly press the knob to cycle through the
third period without making any settings.
▶ Repeat the whole process for the third DHW ON and OFF
times, if required
If after setting the third DHW time period you decide that you
no longer require it and wish to disable it, follow these steps:
▶ In the Time program, cycle through DHW time periods 1
and 2 by just pressing the knob to accept the time setting
until you reach period 3
▶ Turn the knob to set the flashing hours to 00
▶ Press to accept and the minutes flash
▶ Turn the knob clockwise to 00 and then the display
changes to just dashes and period 3 is disabled
5.1.3 Holiday function
Turn the knob to select the Holiday function
▶ Press the knob to enter the program and OFF is displayed
▶ Press the knob and OFF flashes
▶ If ON is selected and the knob pressed, two day/months
selections are displayed and the first day of the holiday
period flashes
▶ Turn the knob to select the desired day
▶ Press the knob to confirm the month now flashes
▶ Turn the knob to select the desired month
▶ Press the knob to confirm
▶ Now the last day of the holiday period flashes
▶ Turn the knob to select the desired day
▶ Press the knob to confirm and the month now flashes
▶ Turn the knob to select the desired month
▶ Press the knob to confirm
▶ Holiday will be displayed when the function is active
▶ Press the Return button to leave the program after setting.
11
Advertisement
Table of Contents
