Advertisement
MEASURES TO BE RESPECTED / MISURE DA RISPETTARE / MESURES A RESPECTER:
MIN / MAX A AND B MEASURES
MAX. DISTANCE BETWEEN BRACKETS
-------------------------------------------------------------------------------------------------------------------------------------------------------------
hereby declares, under his liability, that products: QK-E400 / QK-E400FX / QK-E400B
are in compliance with the esse
and their amendments and modifica
Sossano, 01/01/2016
A
DECLARATION OF CONFORMITY
(OF THE MANUFACTURER)
Manufacturer: QUIKO ITALY
•
Electro-magne c
Low Voltage D
•
•
Machinery Dir
onal
Body of the country in which the machinery is des ned for use.
B
PUSH TO OPEN SOLUTION
If necessary, when PUSH TO OPEN installation is required,
extending the bracket on the pillar, it is possible to install the
motor internally and let the gate open externally as per the
image below:
Via Seccalegno, 19
36040 Sossano (VI)
Italia
l safety requirements of the re
bility
.........................2004/108/EC
......................................................2006/95/EC
.........................................................2006/42/EC
ns, and with the reg
set forth by the
Managing Director
Luca Borinato
www.quikoitaly.com
Advertisement
