Table of Contents
Advertisement
ASSEMBLY
To make assembly easier, carefully read the
following information and instructions:
• Assembly requires two persons.
• Because of its weight and size, the weight bench
should be assembled in the location where it will
be used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
1.
Before beginning assembly, make sure
that you understand the information in
the box above.
See the upper drawing. Press the 38mm
Square Inner Cap (16) into the end of the
Frame (1).
See the lower drawing. Press two 50mm
Round Outer Caps (9) onto the Adjustment Leg
(3).
Press the 38mm x 50mm Inner Cap (8) into the
Adjustment Leg (3).
Align the indicated holes in the Frame (1) with
the upper adjustment holes in the Adjustment
Leg (3).
Attach the Adjustment Leg (3) to the Frame (1)
with the two Lock Pins (11). Make sure that
the Lock Pins are in place around the
Adjustment Leg.
All manuals and user guides at all-guides.com
6
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
1
16
Align these
holes
1
9
8
11
3
9
Advertisement
Table of Contents
