LAVAZZA CLASSY PLUS Instructions Manual page 23

Problem Problem
On / Stand-by button On / Stand-by button
in red. in red.
The loading lever either does The loading lever either does
not reach the supply position not reach the supply position
or requires an excessive closing or requires an excessive closing
effort. effort.
Coffee is dispensed too fast and, Coffee is dispensed too fast and,
therefore, is not so creamy. therefore, is not so creamy.
The coffee is cold. The coffee is cold.
TROUBLESHOOTING TROUBLESHOOTING
Possible causes Possible causes
blinking blinking » Inadequate machine storing » Inadequate machine storing
conditions / Temporary lock. conditions / Temporary lock.
» Spent capsule drawer filled. » Spent capsule drawer filled.
» Capsule stuck. » Capsule stuck.
» A previously used capsule is » A previously used capsule is
used. used.
» Capsule not present. » Capsule not present.
» Capsule not compatible. » Capsule not compatible.
» Slow supplying – hydraulic » Slow supplying – hydraulic
circuit clogged with limescale. circuit clogged with limescale.
Solution Solution
» Unplug the machine from the » Unplug the machine from the
power socket and allow it to rest power socket and allow it to rest
at room temperature enough at room temperature enough
time (max. 1 hour). time (max. 1 hour).
Plug the machine in again, then Plug the machine in again, then
press the switch-on button press the switch-on button
(make one attempt only). (make one attempt only).
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
» Empty the tray and make an » Empty the tray and make an
attempt at closing the lever. attempt at closing the lever.
» Open and close the lever to » Open and close the lever to
drop the capsule. drop the capsule.
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
» Use a new capsule. » Use a new capsule.
» Insert the capsule. » Insert the capsule.
» Try again by using another » Try again by using another
capsule from a different capsule from a different
package. package.
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
» Perform the descaling » Perform the descaling
procedure by means of the procedure by means of the
Lavazza descaling product. Lavazza descaling product.
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
EN EN
23 23