LAVAZZA CLASSY PLUS Instructions Manual page 17

Hide thumbs Also See for CLASSY PLUS:
Table of Contents

Advertisement

Available languages

Available languages

Place a suitably sized container under the ma-
Place a suitably sized container under the ma-
chine spout.
chine spout.
To start the descaling procedure, press the:
To start the descaling procedure, press the:
"
"
"
"
LUNGO
LUNGO
WEAK
WEAK
and CAPPUCCINO
and CAPPUCCINO
keys together over 3 seconds. The machine will
keys together over 3 seconds. The machine will
emit a beep.
emit a beep.
Press the Coffee 8 oz.
Press the Coffee 8 oz.
caling cycle.
caling cycle.
During the cycle, the on/off
During the cycle, the on/off
key will blink.
key will blink.
To increase the effect of the descaling product,
To increase the effect of the descaling product,
the machine will automatically pause a long
the machine will automatically pause a long
time.
time.
MAINTENANCE AND CLEANING
MAINTENANCE AND CLEANING
key to start the des-
key to start the des-
and Coffee 8 oz.
and Coffee 8 oz.
When the tank is empty, the cycle will be tem-
When the tank is empty, the cycle will be tem-
porarily interrupted and the on/off
porarily interrupted and the on/off
warning and Coffee 8 oz.
warning and Coffee 8 oz.
steady.
steady.
The machine will emit a beeping sound.
The machine will emit a beeping sound.
Finally, remove the water tank, rinse it with fres
Finally, remove the water tank, rinse it with fresh
drinking water and fill it to the max. level.
drinking water and fill it to the max. level.
Fit the water tank back into place in the m -
Fit the water tank back into place in the ma-
chine.
chine.
Place a suitably sized container under the m -
Place a suitably sized container under the ma-
chine spout.
chine spout.
Press the Coffee 8 oz.
Press the Coffee 8 oz.
ing cycle.
ing cycle.
When no water is left in the water tank, repe
When no water is left in the water tank, repeat
the operation by filling up the water tank agai
the operation by filling up the water tank again.
At the end of rinsing procedure, the machin
At the end of rinsing procedure, the machine
will emit a long beeping sound and will be read
will emit a long beeping sound and will be ready
again to brew.
again to brew.
Wipe the machine with a damp cloth to remov
Wipe the machine with a damp cloth to remove
any splash of the descaling solution.
any splash of the descaling solution.
Then, the descaling process will be over.
Then, the descaling process will be over.
EN
EN
m
, descaling
, descalin
ng
key will rema
key will remain
ain
sh
a
a
key
key to start the rins-
to start the rin -
ns
eat
n.
ne
dy
ve
17
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents