LAVAZZA CLASSY PLUS Instructions Manual page 25

Problem Problem
Milk does not foam. Milk does not foam.
The milk-based beverage The milk-based beverage
temperature is too hot. temperature is too hot.
The milk-based beverage The milk-based beverage
temperature is too cold. temperature is too cold.
Noisy operation of the Noisy operation of the
cappuccino maker during the cappuccino maker during the
preparation with milk preparation with milk
TROUBLESHOOTING TROUBLESHOOTING
Possible causes Possible causes
» Milk unsuitable for use. » Milk unsuitable for use.
» Too hot milk temperature. » Too hot milk temperature.
» Beater coil not fitted into place. » Beater coil not fitted into place.
» Insufficient amount of milk fed » Insufficient amount of milk fed
with respect to the selected / with respect to the selected /
desired amount. desired amount.
» Excessive amount of milk fed » Excessive amount of milk fed
with respect to the selected / with respect to the selected /
desired amount. desired amount.
» Milk shipping beater incorrectly » Milk shipping beater incorrectly
fitted into place.. fitted into place..
Solution Solution
» It is recommended that whole » It is recommended that whole
milk (pasteurized or UHT- milk (pasteurized or UHT-
treated) and / or cold skimmed treated) and / or cold skimmed
milk from the fridge of 39.2 to milk from the fridge of 39.2 to
46.4°F (4 to 8°C) should be 46.4°F (4 to 8°C) should be
used. used.
» Use milk at the fridge temperature » Use milk at the fridge temperature
(i.e. ranging between 39.2 to (i.e. ranging between 39.2 to
46.4°F (4 to 8°C). 46.4°F (4 to 8°C).
» Make sure that the beater » Make sure that the beater
coil has been fitted into place coil has been fitted into place
correctly. correctly.
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
» Add more milk by following the » Add more milk by following the
indications of the icons on the indications of the icons on the
milk jug. milk jug.
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
» Decrease the amount of milk by » Decrease the amount of milk by
following the indications of the following the indications of the
icons on the milk jug. icons on the milk jug.
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
» Fit the milk whipping beater » Fit the milk whipping beater
into the correct position, as into the correct position, as
shown in the Manual. shown in the Manual.
IF THE PROBLEM CANNOT IF THE PROBLEM CANNOT
BE SOLVED, CONTACT BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER THE LAVAZZA CUSTOMER
SERVICE. SERVICE.
EN EN
25 25