Before Washing For The First Time; Water Hardness; Basic Settings - Asko DBI663IS.U Operating Instructions Manual

1. Water hardness

In order to achieve good dishwashing results, the dishwasher needs soft water (water with low min-
eral content). Hard water leaves a white coating on dishes and the dishwasher.
Contact the local water utility to check the water hardness in your area. This is important to determine
how much detergent and rinse aid to use.
In general, more rinse aid and detergent are needed for hard water.

2. Basic settings

Open the door and press the main power switch.
"Welcome to your new ASKO. This is a first time set up." is shown on the display. It is important
that you choose the right settings to ensure good dishwashing results.
Main power switch
Settings
1. Language
Select the language to be shown on the display.
2. Rinse aid 0/1/2/3/4/5
Use rinse aid to improve wash and dry times. Also use rinse aid to achieve clear and spotless results.
Select rinse aid dosage. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High
dosage).
Pre-selected at factory: 5
Add rinse aid
Press to open

Before washing for the first time

Select setting
Confirm setting
7