Table continued from last page
Settings
4.
Display settings
5.
Feedback sound
6.
Buzzer volume
7.
Rinse aid
8.
Super rinse
Exit
Options
Contrast top dis-
play1/2/3/4
Logo in top display On/Off
0/1/2/3
0/1/2/3
0/1/2/3/4/5
On/Off
For adjusting the contrast of the display.
Setting to hide the logo shown on the dis-
play.
This sound is used to confirm each button
press.
The buzzer indicates when a dishwashing
program has ended.
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
Increase the rinse aid dosage:
•
If the dishes have water marks.
Reduce the rinse aid dosage:
•
If the dishes have a sticky white/blue
film.
•
If the dishes are streaked.
•
Heavy foaming. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
Super rinse adds two extra rinses.
Activated in the following programs:
Normal
Eco
Light
Plastic
Upper half
Lower half
To exit the dishwasher's Settings menu, se-
lect Exit and confirm your selection with the
mode selector
.
Settings
23