Getting Started; Device Overview; Turning The Device On Or Off - Garmin Tread Owner's Manual

See the Important safety and product information guide in the product box for product warnings and other
important information.
1 Connect to a Wi‑Fi network
®
2 Pair your Bluetooth phone and headset
®
3 Update the maps and software on your device
4 Acquire GPS signals (Acquiring GPS signals, page
5 Mount the device and connect it to power
6 Adjust the screen brightness
7 Navigate to your destination

Device Overview

power key
microSD
USB power and data port

Turning the device on or off

• To turn the device on, press the power button or connect the device to power.
• To put the device in power saving mode, press the power button while the device is on.
While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly
for use.
TIP: you can charge your device faster by putting it in power saving mode while charging the battery.
• To turn off the device completely, hold the power button until a prompt appears on the screen and select Off.
The prompt appears after five seconds. If you release the power button before the prompt appears, the
device enters power saving mode.

Getting started

Getting started
(Connecting to a Wi‑Fi Network, page
(Pairing Your Phone and Headset, page
(Product updates, page
(Installation, page
(Adjusting the screen brightness, page
(Starting a route, page
® memory card slot
WARNING
58)(optional).
58).
2).
4).
3).
36).
32) (optional).
1